Flat Type(MP2 Series)
Flat Type(MP2 Series)
BPX
SelectionModelsDownloadRequest a quote
Flat Type MP2-412P-E
Flat Type MP2-412P-E
  • Detection Range:40mm
  • Detection Method:
  • Detection Distance:
  • Output Mode:PNP open collector
  • Repeatability:5%
Collection
Request Test
Specifications
Dimensions
Circuit diagram
Accessories
Applications
Customs data
ModelMP2-412P-E
Working principlePhotoelectric sensor
Housing styleFlat square
Optical working principleDiffuse reflection
Detection Range40mm
Spot SizeNot applicable (infrared light)
Light SourceInfrared light 850nm
Indicator lightOperating status: Green LED
Sensitivity AdjustmentNone
Switch ModeL.on (light entry action) /D.on (light blocking action) can be switched
Output ModePNP open collector
Response Time ≤1ms
Switching frequency2kHz
Repeatability5%
Hysteresis≤20%
Operating Voltage12~24V DC
Current consumed≤25mA
Residual Voltage< 2.5V (load current is 100mA)
Load Current≤100mA (24VDC)
Insulation Resistance≥50MΩ (500VDC) between power terminal and housing
Withstand Voltage1000VAC (50/60Hz), 1 minute between the power terminal and housing
ProtectiOn CircuitReverse polarity protection/short circuit protection
Operating temperature-20~50℃(without freezing)
Storage Temperature-25~80℃(without freezing)
Operating humidity45 to 85%RH (no condensation)
Storage Humidity35 to 90%RH (no condensation)
Ambient lightIncandescent lamp ≤3000 Lux; Sunlight exposure ≤ 10,000 Lux
Vibration Resistance10 to 55Hz, 1.5mm amplitude, 2 hours in each of the X, Y and Z directions
Protection ratingIP50
Maximum Tightening Torque0.5 Nm or less
Connection Method4-pin connector
Dimensions26.0 x20.0 x9.0 mm
MaterialPC
Weight0.003 kg
AccessoriesMounting screws
Catalogue
CAD Data
Manuals
WhatsApp
+86 18188641602
WhatsApp
(086) 4008856656